P0024 "B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) Trouble Code

P0024 "B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) Trouble Code

P0024 - "B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

OBD-II DTC Trouble Code Description

"B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

What does that mean?

This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles, including but not limited to Toyota, VW, Ford, Dodge, Honda, Chevrolet, Hyundai, Audi, Acura, etc.

A P0024 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module) or ECM (engine control module). VVT is a technology used in the engine to allow it to get greater power or efficiency at different running points.


 

In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The "B" camshaft is either the exhaust, right, or rear camshaft. A P0024 trouble code is basically the same as a P0021 code, except this is for camshaft "B", not "A". Bank 2 is the side of the engine that does NOT contain cylinder #1.

Potential Symptoms

Most likely a P0024 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes

A P0024 DTC trouble code may be caused by one or more of the following:

Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)

Possible Solutions

This DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Other related DTCs: P0010 - P0011 - P0012 - P0020 - P0022

Read: 56