P20DD Exhaust Aftertreatment Fuel Pressure Sensor Circuit
OBD-II Trouble Code Technical Description
Exhaust Aftertreatment Fuel Pressure Sensor Circuit
What does that mean?
This diagnostic trouble code (DTC) is a generic powertrain code and applies to many OBD-II vehicles (1996-newer). That may include but is not limited to vehicles from Mercedes Benz, Mitsubishi, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.
A stored a code P20DD in your diesel powered vehicle means that the powertrain control module (PCM) has detected improper voltage in the fuel pressure sensor circuit for the exhaust aftertreatment system.
The exhaust aftertreatment system (also called selective catalyst reduction system) is used to enhance the capabilities of the exhaust catalyst system. It may consist of one or more of these items; diesel oxidation catalyst, diesel particulate filter, reductant injection system, ammonia slip catalyst, and a nitrogen oxide (NOx) trap.
The reductant injection system is typically composed of at least one reductant injector, a reductant fuel storage tank, and high-pressure reductant fuel lines. A high-pressure, electronic pump is normally situated in the tank or in the fuel supply line. An EAS fuel pressure sensor allows the controller to monitor system pressure when the supply pump is activated. It is within this circuit that a malfunction has been perceived when a code P20DD is stored.
Among other things, exhaust aftertreatment systems (EAS) are responsible for the injection of reductant compound/diesel exhaust fluid (DEF) into the exhaust in front of the diesel particulate filter, NOx trap, and/or the catalytic converter via an automated fluid storage and injection system. Precisely timed DEF injections elevate the temperature of the various filtration elements and allow them to perform more efficiently. Introducing DEF into the catalyst system promotes filtration element longevity and allows fewer harmful exhaust emissions to be released into the atmosphere.
The EAS and catalyst systems are monitored and controlled by either the PCM or a stand-alone controller (which interacts with the PCM). The controller monitors the reductant fluid injection system pressure, O2, NOx, and exhaust temperature sensors (as well as other inputs) to determine the appropriate time for DEF (reductant) injection.
If the PCM detects improper voltage in the circuit for the EAS fuel pressure sensor, a code P20DD will be stored and a malfunction indicator lamp may be illuminated.
What is the severity of this DTC?
A stored code P20DD should be considered severe and addressed as quickly as possible. The EAS system may be damaged as a result of the conditions which contributed to the code P20DD being stored.
What are some of the symptoms of the code?
Symptoms of a P20DD trouble code may include:
Diminished engine performance Excessive black smoke from vehicle exhaust Reduction in fuel efficiency Other EAS/SCR related codesWhat are some of the common causes of the code?
Causes for this code may include:
Defective EAS fuel pressure sensor Bad EAS fuel supply pump Open or shorted wiring in the EAS fuel pressure sensor circuit Bad EAS controller/PCM or programming errorWhat are some P20DD troubleshooting steps?
A diagnostic scanner, a digital volt/ohmmeter (DVOM), and a source of vehicle specific diagnostic information will be required to diagnose a code P20DD.
Locating a technical service bulletin (TSB) that matches the vehicle year, make, and model; as well as the engine size, code/s stored, and symptoms exhibited, could yield helpful diagnostic information.
I like to begin my diagnosis with a visual inspection of the EAS wiring harnesses and connectors. Burnt or damaged wiring and or connectors s
Read: 19
