P202C Reductant Tank Heater Control Circuit High
OBD-II Trouble Code Technical Description
Reductant Tank Heater Control Circuit High
What does that mean?
This diagnostic trouble code (DTC) is a generic powertrain code and applies to many OBD-II vehicles (1996-newer). That may include but is not limited to vehicles from Volkswagen, Mercedes-Benz, Dodge, Audi, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.
A stored code P202C means that the powertrain control module (PCM) has detected excessive voltage in the control circuit for the reductant tank heater.
The catalyst system is responsible for reduction of (basically) all exhaust emissions although certain applications are also equipped with a NOx trap.
Exhaust gas recirculation (EGR) systems go another step further in the reduction of NOx. Nevertheless, today's larger and more powerful diesel engines cannot meet strict federal (U.S.) emission standards with the EGR, diesel particulate filter/catalytic converter, and NOx trap alone. It was for this reason that selective catalytic reduction (SCR) systems were invented.
SCR systems inject a reductant compound or a diesel exhaust fluid (DEF) into the exhaust in front of the diesel particulate filter, NOx trap, and/or the catalytic converter via the reductant injection valve (solenoid). The precisely timed DEF injection elevates the temperature of the filtration element and allows it to perform more efficiently. It enhances filtration element longevity and allows fewer harmful exhaust emissions to be released into the atmosphere. The entire SCR system is monitored and controlled by either the PCM or a stand-alone controller (which interacts with the PCM). Either way, the controller monitors the O2, NOx, and exhaust temperature sensors (as well as other inputs) to determine the appropriate time for DEF (reductant) injection. Precise DEF injection is necessary to maintain exhaust temperature within acceptable parameters and optimize pollutant filtration.
Reductant tank heaters are used to prevent diesel exhaust fluid from freezing during extreme cold temperatures. These heaters are typically located in or around the DEF reservoir.
If the PCM detects a level of voltage on the reductant tank heater control circuit that is higher than the maximum allowable parameter, a code P202C will be stored and a malfunction indicator lamp (MIL) may be illuminated. Multiple ignition cycles - with a failure - may be required for MIL illumination.
What is the severity of this DTC?
A stored code P202C should be considered severe and addressed as quickly as possible. The SCR system could be disabled because of it. Catalyst damage could result if the conditions which contributed to the code being stored are not rectified in a timely fashion.
What are some of the symptoms of the code?
Symptoms of a P202C trouble code may include:
Reduction in fuel efficiency Excessive black smoke from vehicle exhaust Diminished engine performance Other SCR related codesWhat are some of the common causes of the code?
Causes for this code may include:
Bad reductant tank heater element Open or shorted circuits in the reductant tank heater control Bad SCR controller/PCM or programming errorWhat are some P202C troubleshooting steps?
A diagnostic scanner, a digital volt/ohmmeter (DVOM), and a source of vehicle specific diagnostic information will be required to diagnose a code P202C.
You may use your source of vehicle information to locate a technical service bulletin (TSB) that matches the vehicle year, make, and model; as well as the engine size, code/s stored, and symptoms exhibited. If you find one, it could yield helpful diagnostic information.
Use the scanner (connected to the vehicle diagnostic connector) to retrieve
Read: 21
