P0535 A/C Evaporator Temperature Sensor Circuit
OBD-II Trouble Code Technical Description
A/C Evaporator Temperature Sensor Circuit
What does that mean?
This is a generic diagnostic trouble code (DTC) and applies to OBD-II vehicles. That may include but is not limited to vehicles from Ford, Chevrolet, Dodge, Ram, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.
Essentially, the air conditioning evaporator operates in the opposite sense as a condenser. The condenser converts gas to fluid and the evaporator converts fluid to gas while absorbing heat from the fan air flowing through it in the process.
It's purpose is to remove heat from the air inside the cabin, in turn reducing the temperature inside the car. The functionality of the A/C evaporator temperature sensor is crucial to the proper operation of your HVAC (Heating, Ventilation and Air Conditioning) system. The ECM (Engine Control Module) uses electrical values from this sensor to adjust the temperature inside according to your needs, in coordination with your evaporator among other A/C components.
The ECM activates P0535 and associated codes (P0536, P0537, P0538, and P0539) when it detects an outside of desired electrical range condition within the A/C evaporator temperature sensor or it's circuits. This could equally be mechanical or an electrical problem, Always keep in mind the environment of the sensor (any sensor for that matter), it could be subjected to an environment posed with unique issues.
P0535 A/C Evaporator Temperature Sensor Circuit code is set when the ECM detects a general malfunction within the A/C evaporator temperature sensor or it's circuit(s).
Photo of one style of evaporator temperature sensor:
What is the severity of this DTC?
Given the fact that your entire HVAC system was designed with the sole purpose of keeping humans more comfortable, severity here is set to the lowest possible setting. Complete malfunction of the HVAC system would pose pretty much zero threat to your safety. That being said, if you value comfort like myself, you will need to address this problem immediately.
What are some of the symptoms of the code?
Symptoms of a P0535 trouble code may include:
No cold air blowing from the air vents Fan air temperature erratic/fluctuating A/C compressor clutch not engaging HVAC system not functioning as desiredWhat are some of the common causes of the code?
Causes for this P0535 code may include:
Defective or damaged A/C Evaporator core Defective A/C Evaporator Temperature sensor Defective ECM ( Engine Control Module) Wiring issue within the sensor's circuit Wiring harness connector issue Intermittent electrical connection Internal resistance (corrosion, damaged harness, overheated circuit, etc..)What are some P0535 troubleshooting steps?
Be sure to check for technical service bulletins (TSBs) for your vehicle. Getting access to a known fix can save you time and money during diagnosis.
Basic Step #1
Locate and visually inspect the A/C evaporator temperature sensor. Generally speaking the evaporator core is located inside the HVAC (heating ventilation and air conditioning) air box. The A/C Evaporator Temperature sensor is typically mounted to the evaporator itself or very near it. You may be able to gain access by looking under the dash fairly easily. It may also be possible that you will need to remove numerous plastic panels and/or the radio so always refer to your service manual for the specific location. Keep an eye out for any signs of overheating and/ or corrosion on the sensor itself. This may indicative of your problem. If found defective, replace the sensor.
TIP: Make sure that your interior is at a reasonable temperature. Start prying on cold plastic and it will break so be careful.
Read: 49
