P2515 A/C Refrigerant Pressure Sensor B Circuit Malfunction
OBD-II Trouble Code Technical Description
A/C Refrigerant Pressure Sensor B Circuit Malfunction
What does that mean?
This is a generic diagnostic trouble code (DTC) and typically applies to OBD-II vehicles. Vehicle makes may include but aren't limited to Chevrolet / Chevy, Ford, Volvo, Dodge, Hyundai, Vauxhall, Honda, Nissan, Renault, Alfa Romeo, etc.
The air conditioning (A/C) refrigerant pressure sensor aids in assisting the HVAC (Heating, Ventilation and Air Conditioning) system in regulating the temperature inside the vehicle according to your demands.
The BCM (Body Control Module) or the ECC (Electronic Climate Control) Module monitors the sensor to determines system pressures, in turn can engage/disengage the compressor accordingly.
The A/C refrigerant pressure sensor is a pressure transducer, it converts refrigerant system pressure to analog electrical signal to allow for monitoring by the vehicle's modules. Typically, it does this using 3 wires: a 5 volt reference wire, signal wire and a ground wire. The modules compare the signal wire's values to the 5 volt reference, and can instantly calculate system pressures with this info.
The ECM (Engine Control Module) illuminates the MIL (Malfunction Indicator Lamp) with P2515 and associated codes (P2515, P2516, P2517, and P2518) when it detects a fault within the A/C refrigerant pressure sensor or it's circuits. Before doing any kind of diagnosing and/or repairing within the A/C, you must make sure you are aware of the numerous hazards involved in working with pressurized refrigerant. Most times, you can diagnose this type of code without opening the refrigerant system.
The code P2515 A/C Refrigerant Pressure Sensor B Circuit Malfunction is set when one of the modules monitors a general malfunction within the A/C refrigerant pressure sensor B or it's circuit. An example of an A/C refrigerant pressure sensor:
What is the severity of this DTC?
In my opinion, any HVAC related code's severity will be fairly low. In this case, pressurized refrigerant is involved, it may be more of a pressing issue. Who knows, a refrigerant leak may be causing this code, and leaking refrigerant is definitely a hazard so make sure you have some basic refrigerant safety knowledge before attempting any type of repairs on the A/C system.
What are some of the symptoms of the code?
Symptoms of a P2515 diagnostic code may include:
Inaccurate temperatures coming from fan air Limited HVAC use Fan air temperature erratic/fluctuating A/C compressor not engaging when needed HVAC system operating abnormallyWhat are some of the common causes of the code?
Causes for this P2515 transmission code may include:
Defective or damaged A/C refrigerant pressure sensor A/C refrigerant pressure sensor leaking Low or incorrect refrigerant pressures/refrigerant level Damaged wire(s) (open,short to +, short to -, etc.) Damaged connector ECC (Electronic Climate Control) or BCM (Body Control Module) issue Poor connectionsWhat are some P2515 diagnostic and troubleshooting steps?
Prior to beginning the troubleshooting process for any malfunction you should research the Technical Service Bulletins (TSB's) for the specific vehicle by year, model and transmission. This step can save you time and money during diagnosis and repair!
Basic Step #1
Depending on what tools/knowledge you have access to, you can easily verify the A/C refrigerant pressure sensors operation. The 2 easy ways to do this is: 1. Depending on your OBD reader/scan tool's abilities and limitations, you may be able to monitor refrigerant pressures and other desired values while system is operating to verify the sensor's functionality. 2. If you have a A/C manifold gauge set, you can monitor the pressures mechanically and compare pre
Read: 22
