P071D Transmission Mode Switch B Circuit
OBD-II Trouble Code Technical Description
Transmission Mode Switch B Circuit
What does that mean?
This is a generic powertrain diagnostic trouble code (DTC) and typically applies to OBD-II vehicles. That may include but is not limited to vehicles from GMC, Chevrolet, Ford, Buick, Dodge, etc. Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration.
The Transmission Control Module (TCM) monitors all the sensors and switches involved in the operation of the transmission. This day in age, automatic transmissions (a.k.a A/T) have more creature comforts than ever before.
For instance, at times, cruise control is monitored and controlled by the TCM (among possible other modules). The example I will use in this article is, the tow/haul mode, it is enabled by the operator to modify the ratios and shift patterns to accommodate varying loads and/or towing demands. The operation of this switch is imperative to the functionality of the tow/haul function among other possibly included systems. This will vary significantly between manufacturers so make sure to know WHICH mode switch applies to your current fault and specific make and model.
The letter "B" in this code, in this case anyway, could have multiple different definitions/ distinguishing factors. Most times, these will vary, so make sure to acquire the appropriate service information before performing any invasive troubleshooting steps. This is not only important but required to accurately troubleshoot obscure or non-common faults. Use this as a learning tool, given the generality of the article.
The ECM illuminates the MIL (Malfunction Indicator Lamp) with P071D and/or related codes (P071E, P071F) when it detects a malfunction in the mode switch. The majority of the time, when it comes to tow/haul switch, they are located on or near the shift lever. On a stalk-style shifter, it may be a button on the end of the lever. On console-style shifters, it may be on the dash. Another factor that varies significantly between vehicles, so refer to your service manual for location.
The P071D Transmission Mode Switch B Circuit code gets activated when the ECM (Engine Control Module) and/or the TCM detects a general fault in the "B" transmission mode switch or the circuit.
An example of a stalk-mounted transmission tow/haul mode switch:
What is the severity of this DTC?
Severity depends heavily on what mode switch your vehicle's fault is referring to. In the tow/haul switches case, I would say this is set to low severity. That said, you may want to avoid heavy loads and/or heavy towing. This may cause you to be putting unneeded stress on the transmission and it's components so be common sensical here.
What are some of the symptoms of the code?
Symptoms of a P071D trouble code may include:
Mode switch inoperative (e.g. tow/haul mode switch, sport mode switch, etc.) Erratic and/or abnormal switch operation Inefficient shift pattern Low power under heavy load/towing Not downshifting when torque is neededWhat are some of the common causes of the code?
Causes for this P071D code may include:
Defective or damaged mode switch Corrosion causing high resistance (e.g. connectors, pins, grounds, etc.) Wiring issue (e.g. frayed, open, short to power, short to ground, etc.) Defective shift lever TCM (Transmission Control Module) issue Fuse/box issueWhat are some P071D troubleshooting steps?
Basic Step #1
Depending on what tools/references you have at your disposal, your start point may be different. That said, if your scanner has any monitoring capabilities (DATA STREAM), you may be able to monitor the values and/or operation of your particular mode switch. If so, toggle the switch on and off to see if your scanner recogniz
Read: 31
