P053B Positive Crankcase Ventilation Heater Control Circuit Low
OBD-II Trouble Code Technical Description
Positive Crankcase Ventilation Heater Control Circuit Low
What does that mean?
This is a generic powertrain diagnostic trouble code (DTC) and typically applies to OBD-II vehicles. Vehicle makes may include but aren't limited to BMW, Mini, Jeep, Chrysler, Ford, etc.
The PCV (Positive Crankcase Ventilation) is technically a system designed to remove harmful vapors from the engine and also, to prevent the said vapors to be ejected into the atmosphere. It is also able to do this by the use of manifold vacuum in order to suck the vapors from the crankcase in the intake manifold. The crankcase vapors are led through the combustion chambers alongside with the fuel and air mixture to be burned. The PCV valve controls the circulation within the system, which makes it an effective ventilation system for the crankcase and also a pollution management device.
This PCV system has become the standard for all new vehicles since the 1960's and variety of systems have been created throughout the years, but the main function of it is the same. There are two main kinds of PCV systems, which are open and closed systems. Technically both function similarly, however, since the use of the closed system in 1968 it has been proven to be more effective for air pollution control.
With the aid of a heater system/element, the PCV system is able to remove moisture, which is considered to be one of the major contaminants within the engine. As the engine functions, it generally creates heat that is able to burn off most of the moisture in the system. However, when it cools down, this is where condensation occurs. There are specific additives in engine oils, which suspends the water molecule caused by the moisture. However, in due time it eventually exceeds its capacity and the water corrodes the metal parts of the engine that damages it to an extent.
The ECM (Engine control module) is responsible for monitoring and adjusting the positive crankcase ventilation heater control circuit. If the P053B code is active, the ECM has detected a low voltage electrical condition within the PCV heater control circuit.
Example of a PCV valve:
What is the severity of this DTC?
In this case, medium-high severity, which is why dealing with the problem is crucial, because once the PCV system fails due to sludge build up and oil leaks occur, you could cause damage to your engine to a certain extent. A plugged PCV valve due to sludge will cause many other possible engine problems. Pressure will start to build that could cause the gaskets and oil seal to fail.
What are some of the symptoms of the code?
Symptoms of a P053B diagnostic code may include:
Excessive oil consumption Sludge in engine oil Engine misfire Reduced fuel economy Engine oil leak A failed PCV valve may cause noise such as a whistle, whine, or other low moaning noises.What are some of the common causes of the code?
Causes for this P053B positive crankcase ventilation code may include:
PCV valve that stuck open Wiring issue causing an open/short/out of range condition in the positive crankcase ventilation heater control circuit ECM (engine control module) issue (i.e. internal short, open, etc.) Contaminated inline PCV air filter (possibly internal) Oil contamination on electrical connector and/or harnesses involved causing electrical connection issue PCV heater defectiveWhat are some P053B diagnostic and troubleshooting steps?
The first step in the troubleshooting process for any malfunction is to research the Technical Service Bulletins (TSB) for known issues with the specific vehicle.
Advanced diagnostic steps become very vehicle specific and may require the appropriate advanced equipment and knowledge to perform accurately. We include basic
Read: 41
